Serge's Python "BIRDCAGE"
NOTE: I only provide webspace for Serge Prinz, I am not the builder of this bike!!
Frame Data
- Pivot angle 63 degres
- Trail -274 mm
- Wheelbase 1253 mm
- Wheels 26"
- Groundclearance 104 mm
- Bottom bracket /seatfront ±740 mm
- Seatheight bottom 285 mm
- Seatheight front 335 mm
- Height center Frontwheel 318 mm
- Heightdifference center bottombracket /seatbottom 255 mm
- Height bottombracket /ground 540 mm
- Bottombracket center front wheel ±400 mm
- Seat challenge seat clone, 3mm aluminium, using rivets.
- Tubing: 13x1.25(bought), 10x1 (bought), 8x1 (bought),8x 2.5(bought)
- Weight: +-16kg
Everything is Tig welded
The pivot uses Askubal 10 mm (2)
Components
- Continental Sportcontact 26 x 1.6
- Brakes Shimano V- brake M421
- Derailleur front and rear Shimano Gs 200
- Gearshifter Rapidfire Shimano LX
Some Weight Considerations
The frame itself weighs about 5kgs. The paint that was sprayed on was about 358gr, but about 150-200grs real weight difference. The other parts weigh 10kg!Photos
